
Re: master cylinder
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: master cylinder
- From: george smith <bt6t4@xxxxxxxxx>
- Date: Wed, 28 Oct 2009 11:55:46 -0700 (PDT)
You're correct there is no room for a booster.I used a early 70's e body master. Also,buy the heat shield from Mancini for the master. The MW manifolds put out tremendous heat.
George
--- On Wed, 10/28/09, Harry skalla <moweepea@xxxxxxxxxxx> wrote:
> From: Harry skalla <moweepea@xxxxxxxxxxx>
> Subject: master cylinder
> To: "1962 1965" <1962to1965mopars@xxxxxxxxxx>
> Date: Wednesday, October 28, 2009, 10:57 AM
>
>
> Thinking about getting rid of my single master on my 64
> Dodge, and putting a duel cylinder on. But I have Max
> Wedge exhaust manifolds. Can I put a duel cylinder on?? Hate
> to get rid of the stock exhaust. If so any ideas on what
> year cylinder to put on. I'm almost sure that I can't
> run a boster with it...
> [Non-text portions of this message have been removed]
>
>
> ----
> Please address private mail -- mail of interest to only one
> person -- directly to that person. I.e., send
> parts/car transactions and negotiations as well as other
> personal messages only to the intended recipient, not to the
> Clubhouse public address. This practice will protect your
> privacy, reduce the total volume of mail and fine tune the
> content signal to Mopar topic. Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.
>
>
>
Back to the Home of the Forward Look Network