Re: Oil breather finish?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Oil breather finish?



${top_text_ad}
Thanks Gary.

I guess I'll go with the black.  Mine looks like the first, which is
somewhere between silver, dirty, and black.

PluckedChicken,
My 63 383, which is very original, is for sure turquoise engine block
and black Air Filter cover.  For the turquoise engine paint,
Summit Racing has what you need:

DCC-4120752AB        TURQUOISE ENGINE PAINT           1     1Z4758400388748531

- Jim
Jim Altemose, Long Island, NY
'63 Polara 500 (Max Wedge)
'63 Polara 500 (383)
'65 Belvedere I (Street Wedge)
'71 Bronco


On Mon, Sep 28, 2009 at 4:43 PM, Gary H. <spigot2039@xxxxxxxxxxx> wrote:
>
> Seems like black is what I recall.
>
> http://www.texasacres.com/parts/1/engine3.jpg  shows an apparently  unrestored 1967 383 factory 4 bbl motor
>
> And here's one on a 1963 max wedge, which looks more satin than gloss black in this picture:
> http://s738.photobucket.com/albums/xx22/hemijordan/1963%20Polara%20500%20Convertible%20-%20Max%20Wedge/?action=view&current=100_4530.jpg
>
> Thanks,
> Gary H.
> -----Original Message-----
>
>>What kind of finish is the valve cover oil breather supposed to have
>>on a 63 Polara 500 with a 383?  I can't tell if it's silver or was
>>painted black at one time.  It feels like aluminum, but it seems to be
>>rusting a bit and there's areas on it that look like black paint but
>>it could just be dirt.  Any advice on finishing it so it looks good?
>>It says Oil on it; reminds me of that old blonde joke about missing
>>the "710" cap.
>>
>>As always, thanks.
>>
>>- Jim
>
>
> ----
> Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.
>
>

${bottom_text_ad}
----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.

This email was sent to: ${recipient}

u/?bUrDWg.${encoded_sub_id}.${EMC}








Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.