Re: turn signal problem

[65 <65Val@xxxxxxxxx>]

Nick......The front and rear bulbs for turn/brake are dual filament, which 
also means there are 2 wires running to the bulb. Check continuity of both 
wires. 1 may be good and the other dead. If both are good, check the sockets 
and the little contacts at the bottom of the sockets. Corrosion can cause 
this probem.

Good luck.

Darwin/BC Canada
'65 Cdn. Valiant Custom 100 'vert
225/A833
'67 Dart GT 'vert
273/904

----- Original Message ----- 
From: "Nick Adamski" <labrothia@xxxxxxxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Friday, August 21, 2009 11:56 AM
Subject: turn signal problem


> Hey,
> When i got my 64 inspected the other day. They said that the left turn 
> signal isn't lighting up on the out side. It works in the inside. The 
> parking light works to. We changed the bulb it it still wont do anything. 
> What you guys thinks it is.
>
> Thank's
> [Non-text portions of this message have been removed]
>
>
> ----
> Please address private mail -- mail of interest to only one person --  
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.