Re: Rockers for 383

[Alex Ariemiea <ajaremea@xxxxxxxxxxx>]

I just purchased a whole set from mancini,  If your engine is orginial then the engine had 1.5 rockers. You need to know if its the right or left one that needs replaced because they are different. You can also buy them individually. If I had one go bad, I would change the whole set.                                  Al in Ohio
 
 
57 Imperial conv.
64 Dodge 880
62 Dodge Polara 500 (in restoration)

--- On Tue, 8/18/09, david_seibert@xxxxxxxxxxx <david_seibert@xxxxxxxxxxx> wrote:


From: david_seibert@xxxxxxxxxxx <david_seibert@xxxxxxxxxxx>
Subject: Rockers for 383
To: 1962to1965mopars@xxxxxxxxxx
Date: Tuesday, August 18, 2009, 6:06 PM



Had a rocker fail in my original 1964 engine and would like to replace 
all while I am at it.  Summit has some either aluminum or steel.  Some 
have a 1.5 ratio and some have 1.6 ratio.  Not sure what the difference 
is and if either would work.  Is there any other source for these?  
Thanks in advance for any help.

Dave


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 


--
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

u/?bUrDWg.bSONJP.YXJjLjYy



?p=TEXFOOTER