Re: sway bars
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: sway bars




The .920s are good if your looking for steer ability on a Big block equipped
car, want to increase your load carrying capacity or help level / stiffen
the car out on tight corners.  The .960s are for road race applications &
load increasing a high option car with a RB or Hemi.  Both can slow you down
at the drag strip and take the driving enjoyment out of a cruiser.  .890s
are good for all round driving.  .810s are good for low option 6 cylinder
and A engines.  Now if your drag racing with a little street driving the 
810s & 90/10 shocks are the way to go for weight transfer.  The heaver bars
work the same up & down and restrict weight transfer to the rear wheels and
actually unload your suspension a short distance off the line about the time
you hit second letting your tires spin instead of accelerating faster.  When
your tires are spinning your not accelerating to your fullest potential,
ultimately slowing you down from point A to point B.  The bottom line .890s
with a good set of shocks for best all round drive ability.  I would invest
in a sway bar before heaver T bars unless they needed to be replaced anyway.

         
 Herb 
 
1956 Plymouth Belvedere 361
1959 Coronet 326 Poly
1963 Fury 2D/HT 6.1
1963 Sport Fury Convertible 361
1970 Challenger RT 440
1999 Durango SLT 5.9
2006 300-C Heritage 5.7
2008 SRT-8 Magnum 6.1
St. Louis, MO.
 
http://1962to1965mopar.ornocar.com/mmo42009.html
  
 Real Car's have Round Headlights!!


-------Original Message-------
 
From: Ollie
Date: 7/17/2009 8:56:31 AM
To: 1962to1965mopars@xxxxxxxxxx
Subject: Re: sway bars
 
I am going with the .920's..tks for the encouragement.
Ollie
----- Original Message -----
From: "Bill" <Y1TopBanana73@xxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Friday, July 17, 2009 7:36 AM
Subject: Re: sway bars
 
 
${top_text_ad}
Ollie,
 
I just did torsion bars and it made a 200% improvement in the ride and
handling. If you goto http://www.mopartsracing.com/parts/dtrain.html
just past 3/4 of the way down the page, they list :
P5249158 .960" diameter-improved"B/RB" and hemi handling. 188.00
 
Yes...that's right $188. Everyone else wants $300!!!
 
I just put these exact bars in my car and they ride great! I'm not
100% sure I need a sway bar now, but I'll probably do one eventually
anyway.
 
--
Bill M
65 Coronet 500 'vert
http://1962to1965mopar.ornocar.com/mmo62008.html
 
 
 
On Fri, Jul 17, 2009 at 8:33 AM, Ollie<satellite1965@xxxxxxxxxxx> wrote:
>
> Best thing I have ever done was add sway bars to my 65 Satellite. Big
> improvement! Best price at the time was Just Suspension. Bolted right on.
> Both both front and rear. For the little extra went with a set.
> Monday, starting on the torsion bars, adj strut rods and new LCA. I am
> hope
> to say that surpassed the sway bar improvement!
> You will be impressed.
> Ollie's $ .02
 
${bottom_text_ad}
----
Please address private mail -- mail of interest to only one person --
directly to that person.  I.e., send parts/car transactions and negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic.  Thanks!
 
'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.
 
 
----
Please address private mail -- mail of interest to only one person --
directly to that person.  I.e., send parts/car transactions and negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic.  Thanks!
 
'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.
 
 
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

u/?bUrDWg.bSONJP.YXJjLjYy



?p=TEXFOOTER





Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.