RE: Tapered Axle Hub Puller
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Tapered Axle Hub Puller



LOL had to laugh when I read this... should have known Dulmage would know
this trick...

I was going to change my pig out in my first car (at the tender age of 16)
and got similar advise from a local old-timer... his take was to hold the
end of the chain and "crack the whip".  After pinching my fingers, whacking
myself in the knee (and a few other unpleasantries), the axles did come out.
Memories of that job later led to my purchase of a hub puller, then eventual
upgrading to a later housing...

Hopefully somebody will write a book with some of these old kinks and tricks
so the knowledge isn't lost forever! (Dulmage, you listenin'?)

SC 

-----Original Message-----
From: Kevin Merkley [mailto:krmerkley@xxxxxxxxx] 
Sent: Wednesday, July 15, 2009 11:43 AM
To: 1962to1965mopars@xxxxxxxxxx
Subject: RE: Tapered Axle Hub Puller


I talked to Don Dulmage a few months ago about axle removal (after the hub
was gone) and he said that what he uses is a piece of chain.  Attach it to
the axle and the throw the chain away from the axle.  The slack in the chain
will eventually tighten and snap thereby jerking the axle out.

I have also used that method for removing the hubs on a FWD car.

Sometimes the "old" ways are simple and effective.

Regards,

K.


Paul Lennemann wrote:
> 
> I bought my puller off of Ebay.  Can't remember just now but it is 
> made by one of the major tool mfg's like Snap-On.  It was missing one 
> of the legs and the ad said a replacement could be purchased.  I 
> didn't check and later found out that wasn't true.  So I had to make a 
> replacement leg.  Did this with a piece of 1/2" steel.  Works good.  I 
> have always used the wrench behind the nut technique to pop the axles 
> free, never had any trouble.
> 
> Paul L.
> '63 Sport Fury
> 440/727
> http://www.1962to1965mopar.ornocar.org/ml-lennemann63.html
> 
> William Cole wrote:
> > 
> > If anyone is interested, I have a axle/hub puller made by Snap-On. 
> > It's a slide hammer type and is not the wimpy light weight puller. 
> > It probably weighs, (without actually weighing it), about 25 to 30
pounds.
> > If this puller won't pull even the most stubborn hub or axle, you 
> > probably need to change out the complete rearend.
> > It's not a cheapy by any means and I'm not giving it away. Check 
> > with Snap-On for a price, even if they still make it, which I'm in
doubt.
> > Let me know if you're interested.
> > 
> > Bill C.
> > PS: It wouldn't be cheap to ship either because of the weight.
> > On Wed, 15 Jul 2009 03:28:16 +0000, "Dennis C." 
> > <dennis.2914@xxxxxxxxx>
> > said:
> > > 
> > > Hello,
> > > 
> > > If anyone is looking for a puller for the tapered axle hubs here 
> > > is the one I found:
> > > 
> > > http://www.rimactools.com/storefront/ProductDetail.asp?varSessionI
> > > D=645174341&varIgnoreMC=&Prd_ID=0151&Cat_Name=Pullers
> > > 
> > > 
> > > 
> > > 
> > > Not very  big compared to the old style pullers but it works great 
> > > on my
> > > 
> > > 
> > > 63 Sport Fury.
> > > 
> > > Just big enough to bolt up on 3 studs, tightened the puller bolt 
> > > and gave is a wack on the end of the puller bolt and off came the
hubs.
> > > 
> > > If the link did not come through it is a Rimac #0151.
> > > 
> > > Dennis C.
> > > 
> > > 1996 Dodge Ram 3500 Van Conversion
> > > 1964 Plymouth Belvedere 318 Auto
> > > 1963 Plymouth Sport Fury 383 4-speed
> > > 1949 Dodge Pickup 289/C4 soon to be changed
> > > 1998 Honda Valkyrie Standard
> > > 
> > > 
> > > ----
> > > Please address private mail -- mail of interest to only one person 
> > > -- directly to that person.  I.e., send parts/car transactions and 
> > > negotiations as well as other personal messages only to the 
> > > intended recipient, not to the Clubhouse public address. This 
> > > practice will protect your privacy, reduce the total volume of 
> > > mail and fine tune the content signal to Mopar topic.  Thanks!
> > > 
> > > '62 to '65 Mopar Clubhouse Discussion Guidelines:
> > > http://www.1962to1965mopar.ornocar.org/mletiq.html. 
> > > 
> > -- 
> >   William Cole
> >   wedge64@xxxxxxxxxxx
> > 
> > --
> > http://www.fastmail.fm - mmm... Fastmail...
> > 



Kevin R. Merkley
Thunder Bay, Ontario
64 Dodge 440 2dr HT (Cdn)
64 Dodge Polara 500 Convertible (Cdn)


----
Please address private mail -- mail of interest to only one person --
directly to that person.  I.e., send parts/car transactions and negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 













Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.