RE: mini starter heat shield

[Rich Kinsley <rlkinsley@xxxxxxxxx>]

In reading my reply it seems a little vague to me. The tight part is the 
space between the starter and the headers. The heat shield is what I had 
to wiggle in and it is toasty now. The starter  is fine.
Hope I didn't confuse anyone.
Rich Kinsley
=====================================================================
Rich Kinsley wrote:
> 
> I used a Versa shield 7X24 Summit #DEI-010402. It was $26 a few years 
> ago. I have a Summit mini-starter. My starter is sooo tight that I had 
> to wiggle it in like dental floss. It seems to work well but it is 
> cooked now quite badly and I'm thinking of getting another. At least it 
> fit OK. Anything bigger would've been a no-go me thinks.
> 
> Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies
> 
> =====================================================================
> Brian Safford wrote:
> > 
> > Anyone have a recommendation for a heat shield for my mini-starter?
> > 
> > Thanks,
> > Brian
> > '62 Dart 440 4-Door/Poly 318
> 
> 
> 
> Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies



Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.