RE: dual master cylinder for 64 B body.... where to get?....tips & hints
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: dual master cylinder for 64 B body.... where to get?....tips & hints



look at napa for a aspen or volaire 78 79 i believe  

--- On Wed, 7/8/09, george smith <bt6t4@xxxxxxxxx> wrote:

> From: george smith <bt6t4@xxxxxxxxx>
> Subject: RE: dual master cylinder for 64 B body.... where to get?....tips & hints
> To: 1962to1965mopars@xxxxxxxxxx
> Date: Wednesday, July 8, 2009, 9:18 PM
> 
> I went with a master from a 71-72 E Body over the counter
> part.
> George
> 
> 
> --- On Wed, 7/8/09, Rich Kinsley <rlkinsley@xxxxxxxxx>
> wrote:
> 
> > From: Rich Kinsley <rlkinsley@xxxxxxxxx>
> > Subject: RE: dual master cylinder for 64 B body....
> where to get?....tips & hints
> > To: 1962to1965mopars@xxxxxxxxxx
> > Date: Wednesday, July 8, 2009, 2:04 PM
> > 
> > I am sure you can use (and even must use probably)
> your old
> > rod. I had 
> > to use mine. I think you can use a wide variety of
> M/C's. I
> > thnk the 
> > Volare and Diplomat were a couple preffered ones.
> > Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies
> >
> =====================================================================
> > W.A. Edison wrote:
> > > 
> > > I'm converting from drum to disc brakes on the
> front
> > of my 64 Plymouth 
> > > Sport Fury, using parts from a 73 Dodge Dart.
> I've got
> > all the bits and 
> > > pieces, including a proportioning valve, but I
> need a
> > dual master 
> > > cylinder. I can't seem to find an online vendor
> who
> > sells one 
> > > specifically for my car. I ordered one from
> > PartsTrain, but they later 
> > > cancelled the order. I see some companies on the
> 62-65
> > vendors page that 
> > > sell other stuff associated with the m/c like
> adapters
> > and bushings, not 
> > > what I'm looking for. Will other years m/cs fit
> my
> > car?
> > > 
> > > Also, I should be able to use the push rod out of
> my
> > old single master 
> > > cylinder in my new setup, correct? Or will a new
> > master cylinder come 
> > > with a push rod I can use? I have manual brakes
> now
> > and am staying with 
> > > them.
> > > 
> > > Thanks in advance for your help.
> > > 
> > > /Butch /Ferndale, WA
> > > 
> > 
> > 
> > 
> > Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies
> > 
> > 
> > ----
> > Please address private mail -- mail of interest to
> only one
> > person -- directly to that person.  I.e., send
> > parts/car transactions and negotiations as well as
> other
> > personal messages only to the intended recipient, not
> to the
> > Clubhouse public address. This practice will protect
> your
> > privacy, reduce the total volume of mail and fine tune
> the
> > content signal to Mopar topic.  Thanks!
> > 
> > '62 to '65 Mopar Clubhouse Discussion Guidelines:
> > http://www.1962to1965mopar.ornocar.org/mletiq.html. 
> > 
> > 
> 
> 
> 
> 





Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.