Torsion Bars
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Torsion Bars



Hi,

I have a club member that wants to sell me a new set of torsion bars 
that he ordered but were wrong for his car.  He has a 65 Monaco and he 
received 65 B body bars.

My concern is that they are not marked for left and right and they are 
just over 1" in diameter.  The original bars are slightly bigger than 
7/8" in diameter.

The car is a 64 Polara 500 ragtop with a 383 (originally a Poly 313).

Questions for you all.

1) Are aftermarket bars non directional (until they are installed)?

2) Will the 1" diameter bars make the ride considerable stiffer?  

Thanks.

K.

Kevin R. Merkley
Thunder Bay, Ontario
64 Dodge 440 2dr HT (Cdn)
64 Dodge Polara 500 Convertible (Cdn)


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.