RE: 440 help/ Thank's SB for the info!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: 440 help/ Thank's SB for the info!






--- On Tue, 3/24/09, SB <polecat2@xxxxxxxx> wrote:

From: SB <polecat2@xxxxxxxx>
Subject: RE: 440 help
To: 1962to1965mopars@xxxxxxxxxx
Date: Tuesday, March 24, 2009, 1:27 AM

I have disassembled, and rebuilt, a number of 1970's vintage 440 
motorhome engines, and can attest to the following (based on my personal 
experience, which doesn't make the following absolute):

1.  They all use the same pistons as the same year 440 car engines.  413 
motorhome engines use unique, dished pistons in the 7.0:1 compression 
range, but not the 440 motorhome engines.
2.  The blocks on these engines are machined slightly differently, and 
hold more anti-freeze than the same year 440 car engines.
3.  These engines seem to be devoid of most polution controls.  For 
example, I had an intake manifold and carb from a 1978 version that was 
clean.  No EGR, no air pump nonsense, etc.  The Thermoquad carbs are 
free of polution controls and Lean Burn nonsense, and even have a ported 
vacuum advance line.  If you know Thermoquads, that is pretty rare.
4.  Now, the best part.  440 motorhome engines use the best factory 
heads you could ask for, save the Max Wedge heads.  If your engine is a 
1973, it probably has 213 heads on it (if I remember the casting number 
correctly), which are motorhome versions of the 346 head.  They flow at 
least on par with the car heads, and run cooler.  Later 452 motorhome 
heads are, in my opinion, the gold standard of big block heads.  Fastest 
way to check if you've got real good ones--if the heads use
"peanut" 
style, little spark plugs, you've got a real winner.  RV12YC, I think.

Bottom line: Your 1973 motorhome 440 is superior to a 1973 440 car 
engine in many respects, and equal to it in all the rest.  My friends 
and I hunt these things down.


----
Please address private mail -- mail of interest to only one person -- directly
to that person.  I.e., send parts/car transactions and negotiations as well as
other personal messages only to the intended recipient, not to the Clubhouse
public address. This practice will protect your privacy, reduce the total volume
of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 


--
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 













Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.