Re: Bellhousing

["MO ( Steve Mick)" <micher@xxxxxxxxxxxxxxx>]

Jeff and George-You are correct. On further checking, I found that the 
statement made about the 9 1/2 " clutcth was actually about a 6 banger with 
an A833  4 speed --My bad-- WHEW!  Glad to be wrong this time. Thanks 
Guys.........................MO.........sw  iowa
----- Original Message ----- 
From: "Jeff Adams" <ledman_70@xxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Monday, March 02, 2009 7:19 AM
Subject: RE: Bellhousing


> I think you've been give some bogus info Steve...never heard of a 9.5"
> clutch. I have a 65 bell on the 413-bored-to-426 in my 64 Polara with a
> 66/67 A833 and a 10.5" flywheel and clutch. The only thing I had to
> different was a 65 z-bar mount to match the 65 bell, and I got that from
> Brewers. I also put a 71-74 B-body non-console pistol grip shifter thru
> my console, but that took a little extra work...looks great though!
> Steve Mick wrote:
> > I am using a bellhouse from a 1965 B body big block-cast iron.  I read
> > that
> > those used a 9 1/2 inch flywheel with a 120some tooth ring gear. Since
> > the
> > starter bolts to the bellhouse, am I going to have to use a 9 1/2 inch
> > flywheel-clutch? is that true or is there a way to put in a bigger
> > flywheel?
> > 413--A833. Thanks for any help..................MO.........sw  iowa
>
>
>
> Jeff Adams
> 64 Polara
>
>
> ----
> Please address private mail -- mail of interest to only one person --  
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.