Re: Engine mounts

[bt6t4@xxxxxxxxx]

AS weird as it looks.That's how it is on my 64 Polara BB too.

George


--- On Thu, 2/5/09, MO ( Steve Mick) <micher@xxxxxxxxxxxxxxx> wrote:

> From: MO ( Steve Mick) <micher@xxxxxxxxxxxxxxx>
> Subject: Engine mounts
> To: 1962to1965mopars@xxxxxxxxxx
> Date: Thursday, February 5, 2009, 4:33 PM
> I am getting ready to drop the 413 into my 64 dodge
> tomorrow.Got the engine brackets yesterday.. Question is:
> should the left cushion overlap the bracket-to the front- by
> almost 1/2 the width of the cushion?. That puts about 1/4
> " clearance between the edge of the cushion and the oil
> pump. I can't see any other way of doing it. Thanks for
> any input..........................MO...............SW IOWA 
> 
> 
> ----
> Please address private mail -- mail of interest to only one
> person -- directly to that person.  I.e., send parts/car
> transactions and negotiations as well as other personal
> messages only to the intended recipient, not to the
> Clubhouse public address. This practice will protect your
> privacy, reduce the total volume of mail and fine tune the
> content signal to Mopar topic.  Thanks!
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 


      


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.