Re: Front End Kit for '64 B-body

[Ollie <satellite1965@xxxxxxxxxxx>]

All that stuff is available at the local parts store in quality Moog parts. 
Agree with Don....you need the tools and equipment. You are not going to do 
the job in a driveway over the weekend. Best find you a good front end man. 
Just my opinion.
Ollie
----- Original Message ----- 
From: "Don Hudson" <mopar4me@xxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Tuesday, January 13, 2009 4:54 PM
Subject: Re: Front End Kit for '64 B-body



If you have the large ball joint socket and a press (or access to one),
it's not that bad of a job.  Hardest part is to remove the UCA and LCA
bushings.  Your FSM will be your best friend.
Don in VA

Douglas Sutherland wrote:
> If you have recently purchased a front end kit for your car and have 
> rebuilt it yourself or had it installed please reply.My '64 Sport Fury 
> rides like a dump truck.  Last year I installed new leaf springs (to 
> correct the sagging rear-end) and I replaced all the old shocks with KYB 
> gas shocks.  Now it's time to tackle the front end.  I assume all the 
> rubber in my front end is original and is either hardened or just plain 
> worn out.I am looking at the "Original Performance Front End Kit" from 
> PST.  There are two types of kits from PST:The "Original" for $219 has:2 
> upper and 2 lower ball joints4 upper, inner and 2 lower, inner Control Arm 
> Bushings2 Strut Rod Bushing 2 Outer Tie Rod Ends2 Stabilizer Links2 Sway 
> Bar Bushings and Control arm bushingsThe "Super" for $379 has:the same as 
> the "Original" and2 Inner Tie rod Ends2 tie rod Adjusting Sleeves4 upper 
> cam bolt kits and an Idler armI assume I should get the "Super" and just 
> get 'er done!While the front end is torn apart -- why not replace it all? 
> Is that over-kill to improve the ride?I got one quote for about $1000 to 
> get this all installed at a local shop.  But that is ball-park and sight 
> unseen.  Anyone have any input on the installation of these kits?Thanks 
> for your input!Doug in Seattle
> _________________________________________________________________
> Windows Live™ Hotmail®: Chat. Store. Share. Do more with mail. 
> http://windowslive.com/explore?ocid=TXT_TAGLM_WL_t1_hm_justgotbetter_explore_012009
> --
> [Non-text portions of this message have been removed]
>
>
> ----
> Please address private mail -- mail of interest to only one person --  
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.


----
Please address private mail -- mail of interest to only one person --  
directly to that person.  I.e., send parts/car transactions and negotiations 
as well as other personal messages only to the intended recipient, not to 
the Clubhouse public address. This practice will protect your privacy, 
reduce the total volume of mail and fine tune the content signal to Mopar 
topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

u/?bUrDWg.bSONJP.YXJjLjYy



?p=TEXFOOTER