Re: Roller Rockers available for the Poly - need three orders

[Gary Pavlovich <glpavlovich@xxxxxxx>]

Re: Roller Rockers available for the Poly - need three ordersJason,

Thanks for the encouragement.  The price tag is not inexpensive but the quality and abililty to step up the HP with a roller cam requires the roller rocker set.

The way I see it, if you have big dollars into your Poly, such as a well-built Stroker, then the $800 rockers are a complement and can be justified.  If you want to step up to a roller cam and or Poly tunnel ram in the future, the cost is again justified.  

I can guess at the three individuals that would seriously entertain this commitment/purchase; and myself being one of them (without hesitation) then all I now need are two individuals to make the purchase.

Thank you again,
Gary
  ----- Original Message ----- 
  From: Michael J. Simanowitz 
  To: Gary Pavlovich ; Norm Austin ; Mopar Norm ; 1962to1965mopars@xxxxxxxxxx ; 318poly@xxxxxxxxxxxxxxx ; craig fountain ; curt brennan ; David Lind ; john somers ; Matt ; Nathan Nuttall ; Nicholas J. Scalzo ; Ray Bell ; RCoronetfreak@xxxxxxx ; Rick Gilmore ; Robert Stearns ; Tom Duross 
  Sent: Tuesday, November 25, 2008 6:19 PM
  Subject: Re: Roller Rockers available for the Poly - need three orders


  Wow guys... Don over at Racer Brown quoted me $800/set for an initial TEN-set run! Gary found a guy that's willing to do only THREE? That's the most outstanding news I've heard all day!

  Gary, you're a miracle worker! Guys, I say jump on it!

  ~Jason

  On 11/25/08 8:03 PM, "Gary Pavlovich" <glpavlovich@xxxxxxx> wrote:


    Polyheads,

    Roller rockers are ready for the Poly now.
    I will need three orders at $800 a set to get the first three roller rocker sets made; price decreases with more orders but at this price I am hoping for the three orders needed for production.

    Yes, they are expensive, about $250 more than the best LA roller rocker set but that is the price of admission for a quality set of Poly Roller Rockers. 
    The material is 2024 aluminum - a cold finished casting with superior strength over the Comp Cams/Crane offerings.  

    I am not benefiting from these three or any future orders in any way, just trying to complete the circle of true High Performance Poly parts to the few that take their engines to the next level.
    Our mfgr. is not making a normal profit on the creation of these roller rockers either; I am thankful that he has even committed to the project.

    Poly Roller Camshafts are in the near future.

    Please forward any orders and serious inquiries to me off-list at glpavlovich@xxxxxxx
    Thank you,
    Gary

     




  -- 
  [INSERT CLEVER SIGNATURE HERE]

[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.