New swap meet listings

["Gary H." <spigot2039@xxxxxxxxxxx>]

Hi all,

Below are the latest additions to the '62 to '65 Mopar Swap Meet Page.

Reminder: In the past I sent this "heads up" notice about the new ads to Clubhouse members as soon as I put the ads on the Swap Meet Page.

Now I post the listings here first, then upload the ads to the Swap Meet Page a day or two *after* they get listed here.

Thus Clubhouse members get a longer "first shot" at the listings as a
membership perk. :)

http://1962to1965mopar.ornocar.com/swapmeet2008.html

Regards,
Gary H.
 
WANTED

Wanted: looking for a 1962 to 1965 Plymouth Savoy or Dodge 440 / 330, 2 doors only, for a race car project. Prefer 550 miles from N.Y. 11561 Send all info: price, location and pics to me. Thanks, Tim. tensec340_AT_aol.com (Replace the _AT_ with @ and the _DOT_ with . to email the seller. November  15, 2008)

FOR SALE

1964 Plymouth Savoy Wagon for sale. Originally 318 car with power steering and brakes.
The car was originally undercoated. I removed the 318 and trans and totally stripped the bottom of
the car to bare metal. I then tig welded the pin holes in the floor (pin
holes were all there were in the floor) and then Por15ed the entire bottom
of the car. I have a chassis shop and moved the springs in on the frame
rails with a Mopar kit and installed a Cal Trac single leaf spring that is
equal to SS springs in length and rate. I also professionally tied the
frames, The 1965 8 ¾” differential was then fitted with spring mount in
the proper places and re-mounted. The car has been professionally mini
tubbed and a 13”+ tire/wheel combo can be fitted now. All glass is good
and the only remaining rust is just along the top of the rear wheel wells.
The front end has been completely rebuilt and the car has Weld Mag  lite
wheels and near new tires. I have the original interior pieces to include
seats, door panels etc. I also have 4 A100 Van seats. My idea was to create
a 1 of none SS wagon with 2 seats in front and 2 in back. The car has a
hemi hood scoop mounted and the dash, grill and all trim is nice. This is
NOT junk. I also have a 65 Torqueflite so a slip yoke driveshaft can be
fitted. I have a Strange S series Dana housing brand new that was ordered
specifically for the car which is narrowed to take best advantage of the
wheelwells. I have a 72  440 engine and all the parts (new) to rebuild it
with Purple stripe cam, lifters, keepers, retainers, valves, new rods, etc.
I also have a new Chrysler electronic distributor and chrome box, Edelbrock
intake, Chrome valve covers, and a bunch of other stuff .  I have a few
pics and will  get more soon. Car is in Dallas Texas. I will consider Cash
or trade for? Price depends on what you want but is reasonable. Thanks
Tommy   214-662-3370 or   Tommydreynolds_AT_sbcglobal.net  (Replace the _AT_ with @ and the _DOT_ with . to email the seller. November  15, 2008)


1965 Plymouth Belvedere 4 door for sale. Car itself is in good shape; I do not have the engine, trans, or front seat. There is no rust, the floor pan is in good shape, doors shut tight; this is a darn good rebuilder. If interested call 1-812-692-5310 and ask for Gregg. (November  15, 2008)


1965 / 1964  A990 Super Stock Interior for sale -- NEW! -- I am selling a NEW (never installed) interior kit in the correct FAWN color that I purchased from Gary Ball Interiors for a car I no longer own. These interior parts are the BEST money can buy for your Dodge or Plymouth A990 Super Stock (or clone). Correct heat embossed seams. Included are the following: Front Seat Covers (2) Upper and Lower; New Seat Foam for Both Seats; Front Door Panels; Rear Quarter Panels; Rear Divider and Package Tray Combo; Molded Carpet; Extra Carpet (for rear area); All parts will be sold together as a kit. These parts cost me $1,850. + shipping and I will sell everything together for $1,300, (a 30% discount). Located in Southern California. Shipping is extra.  Call Mike @ (949) 584-1639 or email: mopargod_AT_gmail.com  (Replace the _AT_ with @ and the _DOT_ with . to email the seller. November  15, 2008)

========

1965 Dodge AFX Altered Wheelbase for sale, less engine and trans. Featured in Mopar Collectors Guide; Body is arrow straight, color is amber fire pearlcoat and platinum chrome, stainless very  clean no pits or rust, A100 seats, black interior, 16 gal. fuel cell, new dana 60  rearend, 3.73 gear, straight axel, front disc brakes, gasser wheels on front, auto meter gauges, vega steering box, super stock springs, stock dash, stock door panels, no fiberglass. Drives really nice, goes straight. Rear axel is forward 15 inches, front axel is forward 10 inches. New Hemi grille. Set up for Hemi. Cost to build was $55k! Motor Available! Car is in Indiana. Pictures at http://www.Moparcrazy.com -- call Darrick at 260-580-0213 (November 9, 2008)


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

u/?bUrDWg.bSONJP.YXJjLjYy



?p=TEXFOOTER