Re: full trunk repro pans available
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: full trunk repro pans available




I really want to like Kramers. They have been pleasant when I've called and that means a lot to me. But - they just rarely seem to have the things that they advertise, and when they do, prices are at a premium for items available elsewhere. Sometimes, when the part eventually arrives, the stuff has been really nice, but sometimes it is junk. I haven't completely given up yet, but ultimately - over the course of 10 transactions or so - my overall satisfaction level is pretty dang low.

As for the floor pans, I ordered a rear set and wouldn't use them. They were indeed supplied by Sherman's. They somewhat resembled the original pans but didn't extend up to a logical install height, didn't use the original seams, and needed a ton of work to install. I just coudn't justify spending all that time to get them to work, to have them look less than original - If I wanted that, I could get some old road signs and do it the old way. I sold them on evilbay and found a decent original donor floor.

Regards

Wakeman

62 Dart
64 Dart

----- Original Message ----- From: "Alex Ariemiea" <ajaremea@xxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Saturday, October 18, 2008 9:31 PM
Subject: Re: full trunk repro pans available




Scott, You mention ADM, who is this and do they have a web site? I wasn't happy with Kramers inner fenders, they needed lots of inprovements before I could install them.
Alex

--- On Sat, 10/18/08, Scott Weippert <srw-409@xxxxxxxxx> wrote:

From: Scott Weippert <srw-409@xxxxxxxxx>
Subject: Re: full trunk repro pans available
To: 1962to1965mopars@xxxxxxxxxx
Date: Saturday, October 18, 2008, 8:29 AM

Hi guys, Further into the same MCG issue is an AMD 2-page ad that has the
full 62-65 b-body trunk pan also. They have run that same ad a few times
before. AMD could be the supplier, but the MCG article is written as though
Kramer went through the trouble of making his own pan and there is no
reference to AMD. They look like identical products but if you look closely
at the pictures the AMD pan has the holes in the pan punched out but the
Kramer pan does not. I suppose it could be a pre-production piece. I need to
add that I haven't seen the trunk pan on AMD's website yet but if they
are
making them they should be available from any AMD reseller.

I won't be needing a trunk pan for at least a year, so I'm hoping more
light
will be shed on this by next summer and I am very happy to see this part
being made. I hope I didn't muck things up with this post.

Scott

----- Original Message ----- From: "Gary H." <spigot2039@xxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Friday, October 17, 2008 10:01 AM
Subject: Re: full trunk repro pans available



All I can say is that the article claims the pans are 100% accurate. MCG
has not always got it right before, though.

Gary H.

-----Original Message-----
... and the floor pans  ....


----- Original Message -----


I hope there made better than the inner fenders that he sells.


----
Please address private mail -- mail of interest to only one person --
directly to that person.  I.e., send parts/car transactions and
negotiations as well as other personal messages only to the intended
recipient, not to the Clubhouse public address. This practice will protect

your privacy, reduce the total volume of mail and fine tune the content
signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.



----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume
of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.



--
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.





----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.