Re: Use Castrol oil with Zinc
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Use Castrol oil with Zinc



GREAT! And I recently switched to Rotella because of hearing about
rediced zinc, etc in Mobil 1. Is 20W 50 the only weight of Castrol
Syntec that's "Recommended for Classic Cars"?

Bill M
65 Coronet 500 'vert

On Tue, Sep 16, 2008 at 11:58 AM, Gary Pavlovich <glpavlovich@xxxxxxx> wrote:
>
>
> Polyheads,
>
> I suggest you read the following and consider using the Castrol oil formulated for our vintage vehicles;
>
> 3 phone calls this week from customers w/failed flat tappet camshafts (don't cha just love idleing at these cruises?). 2 of the 3 had the hole EDM'd the foot of the lifter (Comp Cams) but failed within about 1000 miles.  Apparently the Shell Rotella T has been reformulated so be carefull there. Much info/selection/choice of oil is availabe now regarding "classic car engines" and the use of  flat tappet camshafts.
> Read the label carefully on your favorite flavor of oil, and/or check out the internet for complete info. The magic ingredients is ZDDP and carry's a SL rating. Rule of thumb is no less than 1200 PPM's of Zinc and at least 75% (900 PPM's) as much of Phosphorous as Zinc.
>
> Subject: RE: CastrolUSA - Expert Advice Form Data
> Date: Tue, 5 Aug 2008 20:48:38 +0000
>
>  Thank you for contacting Castrol North America.
>
>
>
>  The latest API SM/ILSAC GF-4 category calls for reduced Zinc and Phosphorus levels to allow extended catalyst life in current model vehicles. There appear to be field issues associated with the SM/GF-4 oil's level of antiwear in the classic car engines known as flat tappet cam engines.  The current late model passenger car engines are not flat tappet cam engines and have no reported field issues related to the level of antiwear chemistry in the SM/GF-4 oils.
>
>
>
>  Product Recommendations for Flat Tappet (Solid Lifter) Cam Engines:
>
>  Castrol Syntec 20W-50 (Recent reformulation identified by "Recommended for Classic Cars" text on back label) (min Zn = 0.12 = 1200 ppm)(full synthetic)
>
>
>
>  New Motorcycle Products, Expected to be Available Q2 2008:
>
>  Castrol Power RS GPS 10W-30, 10W-40 and 20W-50 (min Zn = 0.12 = 1200 ppm)
>
>  Castrol Power RS R4 10W-50 and 5W-40 (min Zn = 0.12 = 1200 ppm)
>
>  Castrol Power RS V-Twin 20W-40 and 20W-50 (min Zn = 0.12 = 1200 ppm)
>
>
>
>  Castrol Consumer Relations
>
>
>
>
>
>  Gary Pavlovich
>
> [Non-text portions of this message have been removed]
>
>
> ----
> Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.
>
>
>


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.