Re: Exhaust Manifolds- need installation infomation

[Dan McCormack <mcwheels@xxxxxxxxxxxxxx>]

Hi John,

Glad to hear your getting your wagon back together. The best advice I can 
give you on the exhaust manifolds is to use the correct hardware kit. 
Anything else will give you problems. There's a number of vendors that sell 
the kit. Check ebay motors auction # 280248380493.

Dan
63 Fury Convert 440
64 Belvedere Wagon 318 Poly


----- Original Message ----- 
From: "John Hammond" <426_maxwedge@xxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Sunday, July 27, 2008 3:05 PM
Subject: Exhaust Manifolds- need installation infomation


> Hello to everybody, been outta circulation for a while and it's great to 
> be back!  Took some time off from the
> cars to pursue some musical aspirations for a while:  but didn't take too 
> long to find out I'm better at cars than
> guitars.  My '64 330 wagon is back from paint, (SEM HotRod Black),  and my 
> much awaited '65 Belvedere I
> has taken it's place at the body shop.  Had to let the '63 330 sedan go to 
> make this all happen but it seemed to
> make more sense to have one closer to finished than two sitting waiting 
> for a "someday" that never seemed to
> come around.  Luckilly the bodyshop owner loved the '63 enough to accept 
> it as trade for his labor on on the '65
> and even agreed to give me first shot at the Dodge's re-accquisition 
> should he ever decide to turn it loose.  At any
> rate the Plymouth is actually making progress for the first time in five, 
> (or is it six?), years.  My 330 wagon, (sorta
> a RatRod daily driver),  is really coming together quick!  I'm looking 
> forward to having a kool early B to drive
> again.  Anyway, we the new 440 painted last night and I'm ready to stick 
> the exhaust manifolds on it.  I remember
> that some of the bolts go into the water jacket and need sealant on the 
> threads and also that the bolts themselves are
> of different lengths.  Can somebody here tell me:  A. which bolts need 
> sealant;  B.  if it's acceptable to use anti-seize
> on those that don't go into the water jacket;   C. the correct length/size 
> for each bolt in it's specific location;  D. if a
> substitute exists or has been determined to work in place ot the "tube 
> nuts" on a Magnum style manifold?  The man-
> ifolds I'm using are (I've been told) were off of a 440 Magnum from a '71 
> Charger.  I don't want to use anything
> other than these, since I've had them ceramic coated and need to maintain 
> as much ground clearance as possible
> since this wagon will be getting some lowering as well.    Thanks to all 
> who respond, and look forward to getting
> re-aquainted with you all!!!! 
> John Hammond
>
> > '62 to '65 Mopar Clubhouse Discussion Guidelines:
> > http://www.1962to1965mopar.ornocar.org/mletiq.html.
>
>
> ----
> Please address private mail -- mail of interest to only one person --  
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.