Re: Pre 66 727 TF
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Pre 66 727 TF




Gary,

Thank you for the clarification.  I though Marcus was working with the Poly.

Gary
----- Original Message ----- From: <spigot2039@xxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Wednesday, May 07, 2008 2:06 PM
Subject: Re: Pre 66 727 TF



Marcus is working with a big block motor, Gary, not a Poly. Are you saying to use the poly 318 converter with a big block?

Thanks,
Gary H.

-----Original Message-----

Yes.  You can have a higher stall through the fin adjustment; usually you
can get around 2500stall which is where you want to be for a street/strip
Poly with a 264 cam; just enough to build off the line torque.

Gary Pavlovich
----- Original Message -----


What?? The poly engine Torque Converter will make a higher Stall? How much
Higher?

--
Marcus"Hot Rod"Edell-The RevTones www.myspace.com/revtones


----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.




----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.













Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.