Re: 8 3/4

[moparbikeguy@xxxxxxx]

Rockauto has the pinion seal but not the crush sleeve.







'65 Coronet 500 stroker


-----Original Message-----
From: spigot2039@xxxxxxxxxxx
To: 1962to1965mopars@xxxxxxxxxx
Sent: Tue, 22 Apr 2008 7:38 pm
Subject: Re: 8 3/4




Does this look like it?

BCA/NATIONAL Part # 7216   {Oil Seal Leather Shaft Size=1.875" Housing 
Bore=3.105" Outer Diameter=3.11" Width=0.5"} Differential Pinion Seal 
Rear Axle; Outer; Chrysler 8.75" R.G. $23.79

http://www.rockauto.com/catalog/raframecatalog.php

Gary H.

-----Original Message-----
 
>Can anybody tell me where I might be able to purchase a pinion crush sleeve for 
a 489 housing? I'd sure like to be able to get a part number so that I could go 
to my local auto parts rather than using one of the on-line sources.
>
>
>'65 Coronet 500 stroker 


----
Please address private mail -- mail of interest to only one person -- directly 
to that person.  I.e., send parts/car transactions and negotiations as well as 
other personal messages only to the intended recipient, not to the Clubhouse 
public address. This practice will protect your privacy, reduce the total volume 
of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.