Re: Cam Interchange
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Cam Interchange



no they are not interchangable, what that is saying is that it was physically possible to get it to go in the block, but the lobe layout is different and will not work.
Dietz


--- On Wed, 4/23/08, Bill <Y1TopBanana73@xxxxxxxxx> wrote:

> From: Bill <Y1TopBanana73@xxxxxxxxx>
> Subject: Cam Interchange
> To: "62-65 Mopar List" <1962to1965mopars@xxxxxxxxxx>
> Date: Wednesday, April 23, 2008, 1:28 PM
> I just came across this on the crane cams website:
> 
> "The 318 arrived in 1967, and ran through 1986. These
> engines were
> often confused with the 318 ?Poly Head? engine. Cams were
> physically
> interchangeable, but the lobe layout was different for the
> LA. The 318
> LA was also available in 2BBL and 4BBL versions."
> 
> Are the cams really interchangeable? I thought the Poly
> cams were
> different from an LA motor?
> 
> Bill M
> 65 Coronet 500 'vert


      ____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.