Re: Tranny leaks

[Jimmy Peavy <peaver63@xxxxxxxxxxxxxx>]

Remove the throttle valve lever, pry out the old seal, replace with a 
new seal., re-install the throttle valve lever.
Done!

  Jimmy

Paul Lennemann wrote:

> While I've got the engine and transmission out of my car I wanted to fix 
> some of the fluid leaks in the tranny.  Most of it appears to be coming 
> from the area around the shifter cable and throttle cable.  The shifter 
> cable is just replacing the 'O' ring on the cable.  My question is how 
> to replace the seal around the throttle shaft.  There is no mention of 
> it that I can find in the FSM.  I did find the part, #2205 300, Seal, 
> throttle lever shaft.  Do you have to remove the valve body and replace 
> this from inside the case?
> I realize that there may also be some leaking through the sheath on the 
> cables too.  
>
> Paul L.
> '63 Sport Fury
> 440/727
> http://www.1962to1965mopar.ornocar.org/ml-lennemann63.html
>
>
>  


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.