Re: poly question

[Don Dulmage <big-d@xxxxxxxxxxxx>]

You are write I mistyped , it should be 1278
I must be getting to old!
my apologies
Don
Author of
Return to Deutschland (True Adventure)
Old Reliable (Mopar)
http://altonapublicschool.faithweb.com/

http://seniordragster.bravehost.com/index.html
----- Original Message ----- 
From: "Greg Parsons" <63.sport.fury@xxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Wednesday, November 07, 2007 2:44 PM
Subject: Re: poly question


> Don,
>
> Are you sure it was a 1268? I was looking at the KB piston listings and 
> they don't have a 1268 listed. Do you know what the piston was supposed to 
> fit into? Was it an overbore size or standard?
>
> Thanks,
> Greg
>
>
>
> Don Dulmage wrote:
> > Someone asked me about the pistons and deck height on the poly build (360 
> > crank in 318 poly block) my friend Wager was doing as i watched over his 
> > shoulder. He picked most of the parts hisself and seemed to have it 
> > figiured out so you may have been surpised that i didnt know of the top 
> > of my head but i am encouraging folks who i used to do work for to become 
> > more independant since i wont be around forever and i want to play a bit 
> > myself on my senor Dagster project (1962 Slant six ). The Piston he 
> > choose was a Silvolite 1268  and he measured deck height with the 360 
> > crank machined and installed in the early 318 block at .007". He used 
> > compression distand comparisions form the stock piston to the new one and 
> > cacluatated what his deck hieghgt should be. he must have been payning 
> > attention because it worked out perfect.
> > Don
> > Author of
> > Return to Deutschland (True Adventure)
> > Old Reliable (Mopar)
> > http://altonapublicschool.faithweb.com/


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.