Re: gear box

[harry skalla <moweepea@xxxxxxxxxxx>]

Thank you so much
Butch
----- Original Message ----- 
From: "Sean B" <polecat2@xxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Tuesday, November 06, 2007 9:04 PM
Subject: RE: gear box


> Harry,
>
> There is a master spline on the gearbox, coupler, and steering wheel.
> Since you didn't remove the steering wheel, it must be where the box
> joins the coupler.  Remove it, and you will see on each where one groove
> seems to be missing.  These are the master splines, and they need to be
> lined up.
>
> Sean
>
>
> harry skalla wrote:
> > Clear DayHi all, ok, I did something wrong. I replaced my steering box,
> > and
> > thought I had my steering wheel aligned, but when I tightened it all up
> > and
> > took it for a drive ...opps! steering wheel was not straight. Is there a
> >
> > trick or a certain way do hook it all back up so that the steering wheel
> > is
> > straight? Any ideas thanks.....
> > Butch
>
>
> ----
> Please address private mail -- mail of interest to only one person --  
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.