Hi Sky, Thanks so much! That sounds very straightforward. ill give it a try. On Sep 18, 2007, at 1:30 AM, sky62 wrote:
Derrick, one way you can check the total advance is the following method, as described by Don D.I've saved a lot of his posts. they come in handy!"timing. if you dont have an advance light measure a piece of paper 2.21" long and cut it that length. lay it on TDC notch on the pulley and mark the other end forward with White paint (typo corrctor works wonderful) That is 32 /34 degrees. It will give you a reference point to work from with a non advance timing light. You set it to that mark at 3000 RPM. Probably should not run the vaccum advance with a hot cam."Don Schuyler 62 Dodge Dart 440 wagon w/ Poly 318 <http://www.1962to1965mopar.ornocar.org/ml-wrobel62.html>FYI - I Do the Decal designs for the Poly head 318 and more! email me with your needs -<sky62@xxxxxxxxxxxxx>hi all,can some point me to the procedure for adjusting the total mechanical advance on the MP electronic distributor?Im running the vacuum advance blocked off.I think my total advance timing has gone astray and need to measure it and likely repair and adjust to proper settings.thanks in "advance" Derrick Brown '63 Sport Fury, 4 speed derrickb@xxxxxxx
Derrick Brown '63 Sport Fury, 4 speed derrickb@xxxxxxx