Re: Below Intake Manifold

[Lee Sumpter <leesumpter@xxxxxxxxx>]

How about the foil backed fiberglass duct insulation that HVAC
Contractors use. Thats what I am planning to use.


On 9/21/07, David orr <fe2orr@xxxxxxxxxxxxxx> wrote:
>
> I have taken just heavy weight alum foil and made my own pad  Dave O
> ----- Original Message -----
> From: "Jimmy Peavy" <peaver63@xxxxxxxxxxxxxx>
> To: <1962to1965mopars@xxxxxxxxxx>
> Sent: Friday, September 21, 2007 10:53 AM
> Subject: Re: Below Intake Manifold
>
>
> >
> > It isn't absolutely essential that it be replaced, but if you feel you
> > need to, any insulation would work.
> > The styrofoam will work, but if you get any gasoline on it, it's history.
> > There is a product that used to be made that was called Armaflex.
> > Air conditioning companies use it, mostly on refridgerant lines, but it
> > does come in sheets
> > It's black in color, and comes in 1/2" thickness.
> > Works well. Looks like neopreme rubber.
> > As small of a piece  that you need. you may find someone that would give
> > it to you.
> >
> >   Jimmy
> >
> > Gary H. wrote:
> >
> >>There was a disintegrated mess of silver/fiber insulation under the intake
> >>of a 383 that I pulled. Any suggestions as to some modern material to
> >>replace that insulation with?
> >>
> >>Thanks,
> >>Gary H.
> >>
> >>
> >>
> >
> >
> > ----
> > Please address private mail -- mail of interest to only one person --
> > directly to that person.  I.e., send parts/car transactions and
> > negotiations as well as other personal messages only to the intended
> > recipient, not to the Clubhouse public address. This practice will protect
> > your privacy, reduce the total volume of mail and fine tune the content
> > signal to Mopar topic.  Thanks!
> >
> > '62 to '65 Mopar Clubhouse Discussion Guidelines:
> >
> >
> >
> >
>
>
> ----
> Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.
>
>
>


-- 
Lee Sumpter
The Big Bad Dad from Fincastle