Re: Side Mirror

[harry skalla <moweepea@xxxxxxxxxxx>]

Ok, I got the mirror fixed!! I took the mirror off, took the snap ring , 
mirror, and spring off, wrapped a rag around the base and put it in a vise. 
Then taking a small ball hammer I taped on each end of the flat metal piece 
that covers the shaft. By tapping on each end it tightens the  metal piece 
on the shaft. Hope this helps you out....
Butch
----- Original Message ----- 
From: <ledman_70@xxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Wednesday, August 22, 2007 1:51 PM
Subject: RE: Side Mirror


> I'd be interested a remedy for this also, as both of mine are loose.
> Also, what were they thinking on the location of the passenger side
> mirror? Mine is mostly blocked by the went window frame.
>
> harry skalla wrote:
> > Clear DayLet me ask this question one more time. My side view mirror on
> > my
> > 64 Dodge 440, that is the mirror part is loose as a goose. I know there
> > is a
> > way to tighten it, I did it on my 62 Dodge, but I sure can't remember
> > how to
> > do it. I take the snap ring off and then the mirror, but I don't see any
> >
> > screw or anything to tighten it. Anyone remember how to tighten the
> > mirror
> > part on the side mirror?
> > Thanks, Butch
> >
> >                     1964 Dodge 440
>
>
>
> Jeff Adams
> 64 Polara
>
>
> ----
> Please address private mail -- mail of interest to only one person --  
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.