Quick ignition help...

[brian hagen <brian.hagen@xxxxxxxxxxx>]

This is just a general question but maybe someone knows from  
experience.....

Im trying to reset my ignition system back after removing the  
distributor (long story)....

Where does the rotor point, when the car is set at TDC on the #1  
cylinder?  Should it be approx 11o'clock or 5 o'clock? I know this  
isnt exactly precise.. Im just using it to double check myself.

I aligned the timing mark, and checked to see the piston is all the  
way up on Cylinder 1.. and the rotor points to 11 o'clock... does  
this sound right?

Thanks

...also.. the 1-8-4-3-6-5-7-2 wiring sequence is counter clockwise,  
correct?  (I second guess everything!)


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.