Re: Stainless brakeline recommendations

[george smith <bt6t4@xxxxxxxxx>]

Or use coat hangers to make the mockup.
--- Gary Futrell <gary.futrell@xxxxxxxxx> wrote:

> I made mine with stainless too. I plan on doing it
> again, if I can
> ever get the Savoy back from the painter. If you do
> make your own,
> make sure you get a quality bender and flalring
> tool. Just use some
> wire to mock up the bends.
> 
> 
>         Gary F.
> 
> 
> 
> 
> On 6/18/07, Menko <menkoj@xxxxxxxxx> wrote:
> > Hi everyone,
> >
> > I've converted my 62 Lancer over to disc brakes,
> and wanted to replace
> > all of the lines with stainless.  The problem is,
> there isn't exactly
> > a "best fit" kit out there for my application. 
> Thus, I wanted to get
> > some feedback on companies that you have worked
> with and liked.  There
> > is a list of places, like Inline, the ebay stuff,
> etc.  Any practical
> > experience?
> >
> > My problem is, the 62 is *similar* to 63-66 Darts,
> but the kits don't
> > distinguish between those and later Darts, and I
> have discs not a
> > single MC now.  Ideally I'd like a longer rear
> line that comes forward
> > and get the junction up off the framerail, but I
> don't want to mess
> > with double flaring my own lines since I don't
> have the tools to do it
> > well.
> >
> > Advice is welcome!
> >
> >
> > Thanks
> >
> > MJ
> >
> > --
> > Menko Johnson
> > http://menko.no-ip.com/portfolio
> > menkoj@xxxxxxxxx
> >
> 


George



      ____________________________________________________________________________________
Fussy? Opinionated? Impossible to please? Perfect.  Join Yahoo!'s user panel and lay it on us. http://surveylink.yahoo.com/gmrs/yahoo_panel_invite.asp?a=7 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.