Re: Rear (was RE: Need V8 K frame)

["Ben Jr. Morgan" <polara_hotrods@xxxxxxx>]

I've seen people use 66-67 danas from b-bodies before, They are slightly more narrow, but you can sneak bigger tires under there that way.
  ----- Original Message ----- 
  From: Gary H.<mailto:62to65mopar@xxxxxxxxxxx> 
  To: 1962to1965mopars@xxxxxxxxxx<mailto:1962to1965mopars@xxxxxxxxxx> 
  Sent: Monday, June 11, 2007 6:07 AM
  Subject: Rear (was RE: Need V8 K frame)



  If I recall correctly, 65-66 fit easiest, but any B body 8.75 setup can 
  get installed in your '64.

  Gary H.


  jmcollec wrote:
  >  ... I also 
  > need a different rear axle, I know '65 B will work, but are there other 
  > options? I plan on a 360 crate motor, so a solid 8 3/4 would be nice. 
  > Let me know what you need in trade and I'll see what I can do. Thanks
  > 
  > Milt


  ----
  Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

  '62 to '65 Mopar Clubhouse Discussion Guidelines:
  http://www.1962to1965mopar.ornocar.org/mletiq.html<http://www.1962to1965mopar.ornocar.org/mletiq.html>. 


[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.