Re: Power trunk release

["Don H." <mopar4me@xxxxxxxxxxx>]

Any of the factory electric releases will work fine.  I used one on the 65 
Coronet I'm parting out.  It was from an 81-83 Imperial, bolted right on. 
Hardest part was fishing the wire up to the front.  Mount a momentary switch 
with the wire from the trunk to one side.  Run a wire from the fuse box or 
piggytail off the cigarette light to the other side of the switch (that wire 
has to be hot all the time).

Don
----- Original Message ----- 
From: <ledman_70@xxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Sunday, March 11, 2007 4:45 PM
Subject: Power trunk release


> I'm thinking of installing a power trunk release on my 64
> Polara...anyone ever done it or know of a good kit to use?
>
> Jeff Adams
> 64 Polara
>
>
> ----
> Please address private mail -- mail of interest to only one person --  
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.