Re: 65 426 Chrome Valve Covers

[Don <dgallimore@xxxxxxxxxx>]

All my research says, for the B-Body, the driver's side had no tabs and 
the passenger side only had the three folding wire tabs on the manifold 
side.  No Ignition wire tabs at all.  PVC and breather are push on, not 
the rubber grommet type.

   Akron Don
   '65 Bel 1
   '65 Sat Cnvt..


Cam Cutler wrote:
> Good morning gang, I am having a lot of my parts rechromed from my 65 
> Satellite. I have a few sets of different valve covers and my motor has 
> been apart for several years so I cant remember for sure what the 
> correct valve covers are for this motor. I think that one was plain with 
> no wire tabs and one had a single wire tab, but I am not sure. Could 
> someone who has original 426 valve covers please let me know so I dont 
> get the wrong ones rechromed, thanks in advance for your help.
>
>       Cam Cutler / Penticton BC / Canada
>       65 Satellite 426W 4speed
>       66 Charger 383 4Barrel
>       69 Coronet R/T 
>
>
> ----
> Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 
>
>
>   


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.