The 1965 broadcast sheet can be decoded with the proper sales codes. Prior to 1969 the sales codes were numeric, and over the years the numbers changed as more options were made available. Many internet sites lump the sales codes from 1962 through 1968 together, and that just cannot be done. The 1962-64 sales codes went up to about 709 with the optional packages and groups from 320 through 340.. For 1965 the codes were redone, and although the number spans were the same, more codes were added and the numbers juggled around. . Codes were rearranged again for 1966, with the packages/groups starting at 350 and going up to 369. As for the 1965 broadcast sheet, Galen Govier's 1965 numbers will work on both the fender tag and the broadcast sheet. However, the sales codes are valid only on the section above "Build Codes". The "Build Codes" on all broadcast sheets are not based on the sales codes. Most are based on part numbers (torsion bar build codes are the last three digits of the part numbers) while other seem to be 'bin' numbers. If you get a copy of the build record from DC Historical, you will find the record does not have a "Build Code" section and all numbers are based on the sales codes. In your case, Bill, list the codes used on your sheet and I can tell you the correct sales code. You will notice that many columns have three numbers with the last number of the trio typed in the column. For example, "Rear Arm Rest" has code "467". If your car has rear arm rests a "7" appears in the column. Your car thus has sales code "467" (and not "4677") which is the sales code for arm rests. This was done where there are two choices for that sales code - either the car has it or it does not. The "Radio" column, for example, has "44" and if it has a radio there will be a number typed below the "44". If the sheet has "1"., the sales code is "441", which is for the AM Music Master radio. (The 1960-61 code for the same radio was "421", for 1962-64 it was "361" and in 1966-68 it reverted to "421".) And, no, no number under "44" does not mean the car is "Radio Delete". It means the car does not have a radio, which was optional. "Radio Delete" is akin to saying a car without Sure-Grip is "Sure-Grip Delete". Since the basic car did not come with it, it cannot be deleted. Bill Vancouver, BC ------------------------------ Date: Mon, 15 Jan 2007 09:01:20 -0700 From: Jason Chance <j23@xxxxxxxxxxx> Subject: Re: Broadcast Sheet Decoding Bill, The "sales code" numbers can be translated with the Galen Govier books. Hopefully Darrell Davis's book on 65 Dodge will be coming soon. The punch cards use the sales codes. Jason Bill Maurits wrote: > > Does anyone know of or have a source for decoding the codes of a 1965 > Mopar broadcast sheet? I found the info in the 62-65 Mopar Site for > decoding fendertags and was able to decode my tag (all but the radio > code). But when I try and do a web search for 65 broadcast decoding > info, I come up w/ codes that don't match my sheet. I AM going to send > off to Chrysler for copies of my punch cards but don't know if those > codes will be different yet. Can anyone shed some light on this for > me? > > Thanks in advance! > > Bill M > 65 Coronet 500 'vert > > ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html. This email was sent to: arc.6265@xxxxxxxxxxxxxx http:///u/?.. Or send an email to: 1962to1965mopars-unsubscribe@ http:///?p=