
RE: Engine RPM at highway speed
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: Engine RPM at highway speed
- From: Brian Schlump <jsbs@xxxxxxxxxxxxx>
- Date: Sat, 28 Oct 2006 02:03:23 +0000
Sean,
I just went out and checked the portable tach I used to check each car
and it was set on 8 cylinders. Tonight I bought a new Sun Pro tach and
temporarily installed it in the Charger. It's the same tach that I put
in the Belvedere. I'll drive the Charger tomorrow to see how the 2
tachs compare (Sun Pro & Tic-Tock-Tach) and get back to you with the
results.
Sean B wrote:
>
> Brian, this may sound dumb, but is one of your tachs set for a six
> cylinder? I've done that before.
>
> Sean
>
>
> Brian Schlump wrote:
> >
> It tachs at 2,200 rpm at 62
> > mph.
> It tachs at 3,300 rpm at
> > 62 mph.
'64 Belvedere
Woodstock, IL.
"The difference between ordinary and extraordinary is that little
extra."
----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.
This email was sent to: arc.6265@xxxxxxxxxxxxxx
bSONJP.
Or send an email to: 1962to1965mopars-unsubscribe@
Back to the Home of the Forward Look Network