Re: A-Body Axle Choice?

[Jeff <Acuda4me@xxxxxxx>]

IMHO 8 3/4" is the way to go. Lighter than the Dana, but able to take as  
much punishment as you will likely ever throw at it with a small block. But  
beware, it is not QUITE the "bolt in" many claim it to be. You have to shorten  
your drive shaft, and the shock, and none of the axle mounting  hardware 
(U-bolts, etc. interchange) Since you have the old ball and trunion  trans, you will 
likely want to upgrade that too, the results being a drive shaft  that is 
almost completely fabricated, so choose your drive shaft shop  well.

[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

bSONJP. 
Or send an email to: 1962to1965mopars-unsubscribe@