RE: Compression

[ledman_70@xxxxxxxxxxx]

[AD removed for archives]
-------------------------------------------------------------------
Need a new Cell Phone? A BlackBerry 7250 could be yours free! Find 
out how!
caaeatubOyW3Na/Amazing phone
-------------------------------------------------------------------

Thanks for the offer Brian, but I'm making a deal to trade them to 
another list member for a set of streetwedge pistons. I'd hate to mill a 
set of pistons if someone could use them to restore a MW engine.
Jeff
Brian Schlump wrote:
> 
> Jeff,
> I'm running the 11 to 1 domed pistons on hi test gas in my Max Wedge.
> They have a smaller dome, so you might consider milling the larger dome 
> to that height.  I could send you an old one if you'd like to see 
> it...Brian
> 
> 
> ledman_70@xxxxxxxxxxx wrote:
> > 
> > I already considered having them milled, but if they ARE Max Wedge 
> > pistons I'd hate to ruin them. I'd rather trade or sell them to someone 
> > restoring a motor. Thanks for the tips, though.
> > Jeff
> > William Cole wrote:
> > > 
> > > You wouldn't be able to find a head gasket thick
> > > enough to help you.
> > > I had a small block Cheby, (sorry) some years ago that
> > > had big domes on them too. I took them to a machine
> > > shop that deals with race motors and had them cut the
> > > domes down to a reasonable 11 to 1 ratio. They were
> > > like 12.5 to 1 when I got them.
> > > Just a thought!
> > > 
> > > Bill C.
> > > 
> > 
> > 
> > 
> > Jeff Adams
> > 64 Polara
> 
> 
> 
> '64 Belvedere
> Woodstock, IL.
> 
> "The difference between ordinary and extraordinary is that little 
> extra."



Jeff Adams
64 Polara

[AD removed for archives]
-------------------------------------------------------------------
Do you need to borrow money, up to $1500? YES! Payday can help 
you with your needs. Get the cash you need now, click the 
following link:
caaedmbbOyW3Nf/YESPayday
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



bOyW3N.