[AD removed for archives] ------------------------------------------------------------------- Is your computer freezing up or slowing down? Repair corrupt files and harmful errors - protect your PC Take a 2-minute PC health check-up at no charge! caaeatrbOyW3Na/PC PowerScan ------------------------------------------------------------------- Doug, Thanks for the info. Do you think this would all be the same on a '64 B-body? Sean Doug Ahern wrote: > > here are two pictures of the oil pan clearance on my 63 Dodge. > previous pictures I had posted (a while back) were of a > drivetrain mockup, these are after final engine installation > with all the mounts secured. I'm using a stock 4spd > cross member & a B&T A-833 with the Schumacher reproduction > original style 63-65 B/RB mounts & stock isolators. Its a 699 > pan (same as a 187) and a windage tray. I had to dimple > the pan near the k-member for extra clearance, but there is a > ton of centerlink clearance.... [AD removed for archives] ------------------------------------------------------------------- Oprah vs Dr. Phil- who is your favorite? Vote now. caaeatsbOyW3Nf/Your opinion ------------------------------------------------------------------- ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html. bOyW3N.