RE: carb spacers for max wedge intake

[Brian Schlump <jsbs@xxxxxxxxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
Is your computer freezing up or slowing down?
Repair corrupt files and harmful errors - protect your PC
Take a 2-minute PC health check-up at no charge!
caadVJEbOyW3Na/PC PowerScan
-------------------------------------------------------------------

Bob,
Kramers sells thick carb mounting gaskets for the Max Wedge engine, but 
I'm not sure that they will give you enough clearance with the carbs 
you're running.  I talked with a guy who ran those carbs on an original 
MW manifold, and he told me that he had the same problem.  He solved it 
by cutting off the portion of the carb linkage that was hitting on the 
manifold...Brian

Bob Fortson wrote:
> 
> putting my Edelbrock 600's on my A&A max wedge repro
> intake...linkage mechanism on carb is hitting
> manifold... will this be made OK with 1/2" spacer to
> lift carb ? I'm worried about hood clearance...stock
> hood... Help those of you in the know!
> Bob Fortson
> 
> 
> 		
> __________________________________ 
> Yahoo! Mail - PC Magazine Editors' Choice 2005 
> http://mail.yahoo.com



'64 Belvedere
Woodstock, IL.

"The difference between ordinary and extraordinary is that little 
extra."

[AD removed for archives]
-------------------------------------------------------------------
Buying or Selling a Home? Get the Facts Before Buying or Selling! 
Get a FREE Home Valuation TODAY!
caadV2pbOyW3Nf/Home Valuation 
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



bOyW3N.