RE: TTI - X pipe exhaust system install questions

["Gary H." <62to65mopar@xxxxxxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
Get both the MiFi XM Satellite Radio and an Apple iPod for Free! 
caadlVDbOyW3Na/ProductTestPanel 
-------------------------------------------------------------------

Here are some links to what Brian's Belvedere TTI setup looks like.

http://1962to1965mopar.ornocar.org/temp/schlump649.jpg
http://1962to1965mopar.ornocar.org/temp/schlump6410.jpg
http://1962to1965mopar.ornocar.org/temp/schlump6411.jpg

How did the factory route e-brake cables on a similar exhaust system 
back then?  

Gary H.


> I have a '64 Belvedere 2 door hard top.  I purchased the TTI 3" Max 
> Wedge exhaust system with the H-pipe.  My system installed pretty 
> easily, however the emergency brake cable rubs on the bottom side of the 
> 
> exhaust pipes.  If I ran the cable over the top, it would rub on the top 
> 
> side even worse than on the bottom side.
> 
> Recently Norm Brady had a pair of emergency brake cable brackets listed 
> on eBay.   The illustration showed them mounting further forward on the 
> underside of the car.  Using these, there would be 4 brackets to hold 
> the cables above the exhaust pipes.   I looked under my car and the 3" 
> pipes looked bigger in diameter than the ones Norm had illustrated.  It 
> didn't seem like the extra 2 brackets would help my problem.  I sent 
> Norm an email asking if his illustration showed 2-1/2" diameter pipes, 
> but I got no response, so I didn't bid on them.  Possibly some of our 
> other members can let us know how their cables fit....Brian  
> '64 Belvedere
> Woodstock, IL.

[AD removed for archives]
-------------------------------------------------------------------
Need a Laptop? Get a Sony Vaio Laptop Free!
caadlVAbOyW3Nf/ProductTestPanel
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



bOyW3N.