Re: distributors
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: distributors



[AD removed for archives]
-------------------------------------------------------------------
Get a FREE* MP3 Player - yours to keep! Click Here Now!
caadeMpbOyW3Na/MP3 Player Giveaway
-------------------------------------------------------------------

Schuyler...to check the vacuum advance,pull off the dist.cap,grab the breaker plate and see if it will turn in the direction of pushing the vacuum advance arm back into the can. If you cannot push the arm in,then I would say the vacuum can is frozen in the advanced position.When they freeze or stop working,they usually do it in the retarded or "at rest" position.Disconnect the vacuum advance arm from the breaker plate and make sure the plate moves freely...these can freeze up too.If you're running on the street,then you dont want to disable the vacuum advance...it helps performance and mileage.Twist the rotor and make sure your mechanical advance is not seized,or the springs are broken or absent. Again this could happen in the advanced position.What are you setting your initial (idle) timing to?

Hope this helps...

Darwin/Victoria BC/Canada
'65 Cdn.Val.Cust.100 'vert
Slant 6/factory 4 speed

----- Original Message ----- From: "Schuyler Wrobel" <schuyler62@xxxxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Wednesday, March 16, 2005 10:10 PM
Subject: Re: distributors



I was thinking of sending him my distributor... I was trying to give my car a tune-up and it seems the vacuum adv. is not working...my timing light says I'm way advaced!?
could the vacuum mechanism be stuck? ...the way the breaker plate or pick-up plate can be moved about could the vacuum arm come loose?
Is there a kit to convert the dist. to non-vacuum adv.? anyway, something doesn't seem right with the dist. and thought
I'd run these problems by the group. also, how many are running the Mopar electronic dist. and did you make any mods to it?
maybe this subject has all ready been beat on before but I think I missed something? -o: .... (o:
thanks
Schuyler
Schuyler 62 Dodge Dart 440 wagon w/ Poly 318
<http://www.1962to1965mopar.ornocar.org/ml-wrobel62.html>
On Mar 16, 2005, at 5:02 PM, Darwin wrote:


Schuyler...he's a good guy and has been racing a small block powered '66 barracuda for many years. He definitely knows his stuff and can speak from experience.

Darwin/Victoria BC/Canada
'65 Cdn.Val.Cust.100 'vert
Slant 6/factory 4 speed

----- Original Message ----- From: "Schuyler Wrobel" <schuyler62@xxxxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Wednesday, March 16, 2005 12:08 PM
Subject: distributors



Has anyone used this guy or tried something similar with their set up? <http://www.4secondsflat.com/a688specs.html>
thanks for any input about this.
Schuyler
Schuyler 62 Dodge Dart 440 wagon w/ Poly 318
<http://www.1962to1965mopar.ornocar.org/ml-wrobel62.html>




[AD removed for archives]
-------------------------------------------------------------------
Get both the PlayStation2 and Game Cube for Free! Click here to find out how.
caadeMkbOyW3Nf/Consumer Research
-------------------------------------------------------------------


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.


bOyW3N.






Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.