From: Gary Goers <gary@xxxxxxxxxxxxx> Date: March 8, 2005 9:11:11 PM PST To: Schuyler Wrobel <schuyler62@xxxxxxxxxxxxx> Subject: Re: 62-65 wagon tail gate rubber
Hi,
I jsut finished working out seals for the tailgates for the '60-'64 wagons (C bodies only) Have flocked channel that will work for the body where the tailgate glass slides into and made the molded ends for the tailgate weatherstrip. Haven't done anything on the B body wagons as I don't have any samples. I'm pretty sure I could come up with something. A body tailgate weatherstrip is no problem as my standard strip which I use for the C bodies will work fine. The upper channel on these is a real problem. So far, salvaging a good used one is about the only thing to do. Not sure if '65 C body wagon tailgate seals are the same as earlier ones.
Hope this helps,
Gary
Schuyler Wrobel wrote:
Gary or Conrad,
Just wondering if you guys have any thing rubber wise that fits around the tailgate area,
tailgate window and the rear 1/4 windows of the 62-65 Dodge, Chrysler, Plymoth wagons/suburban?
I think the wagons from this era are all the same in the areas where the wheatherstripping rubber
and window channel goes although I'm not a 100% sure. Please let me know if you have any of this stuff
or have any info and I'll let the other wagon owners from our group on the web know.
thanks
Schuyler
Schuyler 62 Dodge Dart 440 wagon w/ Poly 318
<http://www.1962to1965mopar.ornocar.org/ml-wrobel62.html>
-- [Non-text portions of this message have been removed]
---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
bOyW3N.