RE: Master brake cylinder for front/rear disc brakes
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Master brake cylinder for front/rear disc brakes



OH. As you have a disc brake kit already Butch, yes, then go with whatever MC the source of the kit recommends. 

You don't need to read the Mopar Action article I referenced. :) 

Thanks,
Gary H/.


>  -------Original Message-------
 
>  
>  Butch, in my view you should place a call to MP. Sure, there’s a ton
>  of data out there regarding what master cylinder(s) to use when
>  you’ve swapped later model front disc brakes onto our cars, but
>  given you’ve installed an aftermarket kit – particularly the rear
>  disc brake setup – they would have the best knowledge to spec a
>  master cylinder. For example, when I added the Strange rear disc
>  brakes to my Fury they were very specific about the master cylinder
>  piston bore required for proper braking.
>  
>  Jim
>  
 
>  
>  I'll check out the article. I have the MP conversion kit. Thanks!
>  
>  On Tuesday, March 15, 2022 at 5:52:44 PM UTC-7
>  62-65-mail...@xxxxxxxxxxx wrote:
>  
>  > What are the sources of the brake parts you are using?
>  >
>  > Mopar Action / Richard Ehrenberg had / has an article that touches
>  > on "using currently-available [Last updated Jun 10,
>  > 2019] parts, with sourcing almost exclusively via boneyards, your
>  > local Chrysler dealer, and the corner auto-parts store."
>  >
>  > https://www.moparaction.com/2016/03/16/disc-main/
>  >
>  > Thanks,
>  > Gary H.
>  >
>  >> -------Original Message-------
>  >>
>  >> Hi all. Working on the restoration of my 1964 Sport Fury. I'm
>  > putting
>  >> disc brakes front and rear but don't know what kind of master
>  > cylinder
>  >> to use. Appreciate any help. Thanks/Butch --
>  >>
>   

-- 
-- 
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
--- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/1962to1965mopars/20220316163232.56018.qmail%40server309.com.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.