my dipstick is too short

[Skagdrager@xxxxxxx]

[AD removed for archives]
-------------------------------------------------------------------
Click here and get your free* stock car racing gift.
caac2NQa/PermissionData
-------------------------------------------------------------------


OK U guys, get your minds out of the gutter.
I've got 2 62 poly 318 cars and I just discovered that the dipstick is 1 1/2" 
shorter on one (I think this stick is from the later type 318).
I stumbled over this when I changed oil; this time rather than going by the 
dipstick, I checked the service manual specs: 4 quarts for the engine plus one 
more for the filter. So I put 5 in and it wasn't even registering on the 
dipstick at all. (No wonder it has been smoking so badly. I must have been running 
about 60% too much oil in it. And now even though I've got the right amount of 
oil in, it's still smoking most of the time, except warmed up at idle speed.)
If I'm correct the length from the lower tip to where the tube stop will hit 
the top of the tube is about 18 1/4" and from the "FULL" line to the tube stop 
is about 16 3/4". 
You guys with polys, can you verify lengths for me?
And, does anyone have a spare for sale?
Thanks.
Paul

[Non-text portions of this message have been removed]

[AD removed for archives]
-------------------------------------------------------------------
Click here and get your free* stock car racing gift.
caac48Qf/PermissionData
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



http:///u/?.