Re: pullleys and radiators
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: pullleys and radiators



[AD removed for archives]
-------------------------------------------------------------------
Like music?  Get a CD player on us. Click here.
caac2NUa/PermissionData
-------------------------------------------------------------------


You can use a 5 blade flex-a-lite fan with the 1-2 inch spacer too, depending on how hot your big block is it the flex-a-lite may or may not be a good idea. But these are easy to find, just look it up in a jegs or summit catalog.

----- Original Message -----
From: Brian Schlump
Sent: Monday, January 24, 2005 7:35 PM
To: 1962to1965mopars@xxxxxxxxxx
Subject: RE: pullleys and radiators

[AD removed for archives]
-------------------------------------------------------------------
Like music?  Get a CD player on us. Click here.
caac48RbOlZxua/PermissionData
-------------------------------------------------------------------


C Singleton wrote:
there is not enough distance between the radiator and the
water pump pulley to install the new clutch fan. arrrrrrrrrr!       do i  
have to get a different radiator?   

I've found that the new clutch fans are too long (over 3 1/4")to fit  
between my 413 or 426 water pump and the radiator.  I have used 2  
options.  #1 - a 7 blade fan that mounts to the water pump pulley with a  
1" thick aluminum spacer.  I bought one on eBay for $14.  #2 - find an  
original fan clutch #2806070.  It's about 2 5/8" long and fits with less  
than a half inch clearance to the radiator.  Finding one of these is  
difficult.  Occasionally they show up on eBay for big bucks.

Brian


'64 Belvedere
Woodstock, IL.

[AD removed for archives]
-------------------------------------------------------------------
Click here and get your free* stock car racing gift.
caac2NQbOlZxuf/PermissionData
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.  

[Non-text portions of this message have been removed]

[AD removed for archives]
-------------------------------------------------------------------
Click here and get your free* stock car racing gift.
caac48Qf/PermissionData
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



http:///u/?.









Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.