RE: discconversion
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: discconversion



[AD removed for archives]
-------------------------------------------------------------------
Click here and get your free* stock car racing gift.
caac2NQa/PermissionData
-------------------------------------------------------------------

Be careful with those Eldorado rear calipers.

From a Mustang site:
Here is some important maintenance information about the rear Cadillac Calipers:


If you are using Cadillac ElDorado rear calipers there are some important things you should know. One of the biggest advantages of a disc brake system is the fool proof self adjuster. Not so with this rear GM system. The rear calipers adjust off the parking brake. The parking brake is incorporated into the caliper. You must set the parking brake every time you park the car. The rear caliper pitons utilize a one way clutch inside the caliper piston. When the parking brake is applied the clutch senses when there is .030" or more clearance between the friction material and the rotor on the inboard side. When there is more than .030" the clutch turns inside the piston adjusting it out keeping the rear brakes adjusted. If you do not set your parking brake every time you will start to lose brake pedal (low and spongy) and the adjuster mechanism will not work any longer. Also: never use rebuilt calipers on the rear because the rebuilders use the old pistons and the pistons were the reason the caliper failed in the first place.





Dustin http://www.crcmotorsports.com

65 Barracuda "Commando V8"
www.geocities.com/hell_fish_65/
http://www.1962to1965mopar.ornocar.com/dustinc.html

"If it jams force it, if it breaks it needed fixing anyway."








From: Bill <hemirr@xxxxxxxxxxx>
Reply-To: 1962to1965mopars@xxxxxxxxxx
To: 1962to1965mopars@xxxxxxxxxx
Subject: RE: discconversion
Date: Tue, 11 Jan 2005 14:42:03 +0000

[AD removed for archives]
-------------------------------------------------------------------
Like music?  Get a CD player on us. Click here.
caac2NUbWhUNma/PermissionData
-------------------------------------------------------------------

I bought a set of his 8 3/4 rear conversion brackets and the related pieces, haven't begun the installation yet on my '72 Cuda. Unfortunately the rear kits he makes use a '79 firebird caliper that is very expensive, but the rotors are Mopar (300M). I've since found another company that makes a 8 3/4 conversion bracket kit that uses Eldorado rear calipers which are more readily available and cheaper. However, I will say that the brackets are very heavy and well made, look professional, and everything should work out fine. I think I will probably substantially save over SSB or MasterPower kits, and since they don't use Mopar calipers either, nothing lost there.

The big advantage to the brackets you are looking at seems to be no changing the spindle like you need to with late A brakes. I read the write up in the brand new Mopar Muiscle magazine on comparing the F/M body spindles to the A body, and they are saying you can use them, looks like a pretty scientific study at least to a non-engineer like myself. Those are more available right now, and Fat Man even makes those in a dropped version should somebody want that!


Bill & Kathi Parker, South Central Indiana
'56 Chrysler Windsor; '60 Chrysler Saratoga; '62 Plymouth Max Wedge; '64 Dart convertible; '65 Barracuda \6; '65 Imperial; '68 Barracuda FB 340-S; '69 Barracuda FB now 360; '70 Challenger; '72 Cuda '340





From: Joeydahook9@xxxxxxx
Reply-To: 1962to1965mopars@xxxxxxxxxx
To: 1962to1965mopars@xxxxxxxxxx
Subject: discconversion
Date: Tue, 11 Jan 2005 02:30:14 EST

[AD removed for archives]
-------------------------------------------------------------------
** Get Your Own Support-a-Cure Yellow Bracelet for $1.99 **
Show your support for finding cures for both AIDS & Cancer.
Get yours for just $1.99. This bracelet makes a difference.
caacYkkbWhYkEa/Penn Media
-------------------------------------------------------------------


Has anybody seen/used this disc brake conversion that's on ebay
(#7946763806) for 1965 B bodies? The brackets are 85 bucks and you use chevy S-10 rotors
and pads with a mopar master cylinder. They make them up the road from me
in Bothell, WA. Joe


[Non-text portions of this message have been removed]

[AD removed for archives]
-------------------------------------------------------------------
Click here and get your free* stock car racing gift.
caac2NQbWhYkEf/PermissionData
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!


'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.



[AD removed for archives] ------------------------------------------------------------------- How about a cruise on your favorite cruise line-from us? Click here. caac2NYbWhUNmf/PermissionData -------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!


'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.





[AD removed for archives] ------------------------------------------------------------------- Race to claim your complimentary Chevy collectible! caac2NWf/PermissionData -------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.


http:///u/?.







Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.