Re: EXHAUST MANIFOLD STUDS

[Jimmy Peavy <peaver63@xxxxxxxxxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
4 Free Low-Fat recipes
caacQ4Nb7yoMza/PermissionData
-------------------------------------------------------------------

Teflon won't tolerate that much heat. It will  emit a poisionous gas as 
well when exposed to that much heat.
In the petrochemical industry, I use anti-seize almost daily , and while 
it does prevent the nuts from ever seizing on a bolt, it does'nt seal 
threads.
At least nothing I've used has.
There are a number of types that contain copper, or nickel.
The nickel being the best, and most compatible with every metal.
If it worked for you that's great, but it won't seal my threads.
It's not designed to. Even with clean threads.
I don't favor red RTV to do that, as well, but it will .Permatex will also.
It is the last resort for me, and will do the job.


Jimmy

[AD removed for archives]
-------------------------------------------------------------------
Amazing Diet Patch
The fastest - Easiest way to lose weight! Try it now FREE!
caacOlIb7yoMzf/MyDietPatches
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 


b7yoMz.