Rear end swap

[ledman_70@xxxxxxxxxxx]

[AD removed for archives]
-------------------------------------------------------------------
Like music? Get a CD Player here
caacJzeb7yoMza/PermissionData
-------------------------------------------------------------------

Ok guys, here's another question that I'm sure has been answered 
before....I have a 70 Challenger 3:23 suregrip 489 center I'd like to 
install in the 65 Coronet 741 rear end I have. First, is there a gasket 
between the pig and the housing, or do you just use permatex? Second, is 
this a drop-in swap? Third, are the axles the same spline? I realize I 
will have to change u-joints due to the larger yoke on the 489, but is 
there anything else to consider? Thanks in advance for the help.
Jeff
Jeff Adams
64 Polara

[AD removed for archives]
-------------------------------------------------------------------
Claim your tickets to Universal Orlando now
caacJzlb7yoMzf/PermissionData
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz.