RE: bushing rods for floating pins.

[Earl Helm <earlh@xxxxxxxxxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
Click here for your Golden Tee CD ROM
caacJzob7yoMza/PermissionData
-------------------------------------------------------------------

Well I have never done it that way, but I have bushed stock rods with
no issues at all with stock size pins. Of course you have to drill and
oiling hole.

Common sense would dictate that if you were going to use a smaller
pin size, and you can bush a stock rod with no issues, that the smaller
pin bushing would take less material from the rod and maintain strength
beyond the stock size. I would have no issue with doing it.

Earl



The pins are not 1.094 I think they are .990 pins.

can stock rods be bushed for these?

streetwedg

[AD removed for archives]
-------------------------------------------------------------------
Amazing Diet Patch
The fastest - Easiest way to lose weight! Try it now FREE!
caacHOUb7yoMzf/MyDietPatches
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz.