RE: Nervous welder

[Garry Penn <buildin64@xxxxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
Free recipes to get you in shape
caacHMVb7yoMza/PermissionData
-------------------------------------------------------------------

I have used these clamps with great success, but.........you have to 
have access to remove the part of the clamp that is usually on the 
inside, once your panel is welded up.
These work great for qtr patches, trunk, etc when you have access from 
both sides.
Maybe in the cowl area you could 'fish' these pieces out through the J 
nut hole where your fender mounts?
Garry


ntolerance wrote:
> 
> 
> One last thing, Eastwoods make a butt welding clamp. They sell in a 4 
> pack. Check them out at Eastwoodco.com and see of they will help. They 
> will hold your panel flat with your car and they can also be used to 
> help keep warpage down.
> 
> Doc.



Garry Penn
64 Belvedere 2dr Sd, WIP (Work in Progress)
64 Belvedere 2dr Sd, Parts Car
66 Belvedere Wagon (Finally a running car)

[AD removed for archives]
-------------------------------------------------------------------
Want to go on a Cruise for Free?
caacIqOb7yoMzf/PermissionData
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz.