Re: Fan Clutches

[norm brady <nbrady@xxxxxxxxxx>]

==========================================================
Extra! Extra! Read all about it! Get the latest weather,
sports, and lifestyle news you can't afford to miss, all
at a price you can afford to pay!  Click now!
caaa9eYb7yoMza/TopOffers
==========================================================
Brian
   Correct tag for 64 Max Wedge is 2445635. Tag is soldered on. I have a few
, $35. How are your carbs working?
Norm
----- Original Message -----
From: "Brian Schlump" <jsbs@xxxxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Thursday, July 29, 2004 5:13 PM
Subject: RE: Fan Clutches


==========================================================
Extra! Extra! Read all about it! Get the latest weather,
sports, and lifestyle news you can't afford to miss, all
at a price you can afford to pay!  Click now!
caaa9eYb7W7xqa/TopOffers
==========================================================
Mark,
I'm confused about the 3.61" overall height.  My car came from the
factory with a 426 street wedge & now has a Max Wedge.  The 413 the
previous owner installed had the same dimension between the water pump
and radiator.  The radiator number is 2445637, which is correct for a
'64 - 426 - high altitude & A/C.  Maybe it has an extra row of cores
that requires a shorter clutch.  I know a 3.61" would be a half inch too
long to fit between the water pump and radiator...Brian

Mark Kennedy wrote:

Brian:
I checked Haydens catalog in the fan clutch spec chart.  I see that the
fan clutch for your car is 3.61" overall height.

Brian Schlump

My '64 Belvedere has a clutch fan that is 2-1/2" in length.  That leaves
me approx. 1/2" of clearance to the radiator.  All the new  replacements
I found were over 3" long.  I had mine rebuilt, so I
would have one that fits. I talked to another Max Wedge owner
recently,and he's running a normal 4 blade fan, because he can't find a
2-1/2" clutch to fit his either.


----
Please address private mail -- mail of interest to only one person --
directly to that person.  I.e., send parts/car transactions and negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.


_____________________________________________________
This message scanned for viruses by CoreComm


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz.